AMOSPro_Int.Lib and Int.Lib are copyright 1996 D.J.Software
All Rights Reserved

D.J.Software shall not in any way be liable for any
direct,indirect,incidental,consequential damage resulting
from use of this document or software.


If you write any programs and save them I Recommend you also save
a copy as ASCII (.asc) because the commands and the order the commands may
alter in future versions,Then all you have to do is merge the code in.

If you load an Amos Program back in which has been saved in Amos format
after the order of commands has changed you will end up with a lot of 
garbage in the code.


		How To Install This Extension
		
1: Copy The Amos1.3 Extension into the amos_system drawer or the Amospro
Extension into the APSystem drawer.

Amos1.3:

2: Run the Amos program,load and run the config program and 
load the config file access the loaded extensions from the menu 
and alter extension number 25 to :Amos_System/Int.Lib
then save the config file.

AmosPro:

   Run the AmosPro program and from the menu select set interpreter
click on the load config button then click on the set loaded extension
button and alter extension number 25 to :APSystem/AMOSPro_Int.Lib 
and save the config file.

4: Quit Amos.

3: Restart Amos and the extension should load in.

This Version is only a beta demo there are bound to be errors
any errors you find could you please report to us at one of the following
places.

amos@d-gennoe.demon.co.uk
101370,2053@compuserve.com

D.J.Software
216 Paget Road
Erdington
Birmingham
UK
B24 OJJ